Stufin
Home Quick Cart Profile

300 RPM L Shape Single Shaft BO Motor

300 RPM L Shape Single Shaft BO Motor 300 RPM L Shape Single Shaft BO Motor
Buy Now on Stufin

Component Name

300 RPM L Shape Single Shaft BO Motor

Overview

The 300 RPM L Shape Single Shaft BO Motor is a brushless outrunner (BO) motor designed for various applications that require high efficiency, compact design, and reliable performance. This motor is ideal for use in IoT projects, robotics, drones, and other devices that demand precise control and high-speed operation.

Functionality

The 300 RPM L Shape Single Shaft BO Motor is designed to convert electrical energy into mechanical energy. It operates on the principle of electromagnetic induction, where an electric current flows through the motor windings, generating a magnetic field that interacts with the permanent magnets to produce rotational torque. The motor's primary function is to rotate the output shaft at a high speed, providing mechanical power to drive various loads such as propellers, gears, pumps, or other mechanisms.

Key Features

  • High-Speed Operation: The motor is designed to operate at a high speed of 300 RPM, making it suitable for applications that require rapid rotation and precision control.
  • Single Shaft Design: The motor features a single shaft configuration, which simplifies the design and reduces the overall size of the motor. This design also enables the motor to operate efficiently in compact spaces.
  • L-Shape Design: The motor's L-shape design provides a compact and convenient mounting option, allowing for easy integration into various applications.
  • Brushless Outrunner (BO) Technology: The motor employs brushless outrunner technology, which eliminates the need for brushes and commutators. This design feature increases the motor's reliability, efficiency, and lifespan.
  • High-Efficiency Operation: The motor is designed to operate at high efficiency, ensuring minimal energy loss and reduced heat generation. This results in improved performance, extended lifespan, and reduced maintenance.
  • Low Vibration and Noise: The motor's design and construction minimize vibration and noise, making it suitable for applications that require quiet and smooth operation.
  • Compact Size: The motor's compact size and lightweight design make it ideal for use in space-constrained applications, such as drones, robotics, and other IoT devices.
  • High-Torque Output: The motor is capable of producing high torque output, making it suitable for applications that require rapid acceleration and deceleration.
  • Durable Construction: The motor's construction features high-quality materials and robust assembly, ensuring reliable operation and extended lifespan in demanding environments.

Specifications

Rated Speed

300 RPM

Rated Voltage

[Insert rated voltage]

Rated Current

[Insert rated current]

Peak Torque

[Insert peak torque]

Peak Current

[Insert peak current]

Efficiency

[Insert efficiency percentage]

Motor Size

[Insert motor size]

Weight

[Insert weight]

Connector Type

[Insert connector type]

Wire Length

[Insert wire length]

Applications

The 300 RPM L Shape Single Shaft BO Motor is suitable for various applications, including

Drones and Unmanned Aerial Vehicles (UAVs)

Robotics and robotic arms

IoT devices and sensors

Automation and control systems

Medical devices and equipment

Industrial automation and manufacturing systems

Conclusion

The 300 RPM L Shape Single Shaft BO Motor is a high-performance, compact, and efficient motor designed for demanding applications. Its unique design features, high-speed operation, and reliable performance make it an ideal choice for various IoT projects, robotics, and other devices that require precise control and high-speed operation.

Pin Configuration

  • 300 RPM L Shape Single Shaft BO Motor Pinout Documentation
  • The 300 RPM L Shape Single Shaft BO Motor is a compact and efficient DC motor designed for various IoT and robotics applications. This documentation provides a detailed explanation of the motor's pinout, connection structure, and guidelines for proper connection.
  • Pinout Diagram:
  • The motor has a total of 4 pins, arranged in a rectangular shape. The pinout diagram is as follows:
  • ```
  • +-----------+
  • | 1 | 2 |
  • | --- |
  • | 3 | 4 |
  • +-----------+
  • ```
  • Pin Description:
  • Here is a detailed explanation of each pin:
  • Pin 1: VCC (Positive Power Supply)
  • Function: Positive power supply for the motor
  • Description: This pin provides the positive voltage supply to the motor. Connect this pin to a stable DC power source (e.g., a battery or a regulated power supply).
  • Voltage Range: 3V to 12V (depending on the motor's specifications)
  • Pin 2: GND (Ground)
  • Function: Ground reference for the motor
  • Description: This pin provides the ground reference for the motor. Connect this pin to the negative terminal of the power source or a common ground point.
  • Voltage: 0V (Ground)
  • Pin 3: PWM (Pulse Width Modulation) Signal
  • Function: Motor speed control input
  • Description: This pin receives the PWM signal from a microcontroller or a motor driver to control the motor's speed. The PWM signal determines the motor's rotation speed.
  • Signal Frequency: Typically 20-50 kHz (dependent on the motor driver and microcontroller used)
  • Pin 4: NC (No Connection)
  • Function: No internal connection
  • Description: This pin is not connected to any internal motor component and should be left unconnected.
  • Connection Structure:
  • To connect the motor to a microcontroller or a motor driver, follow these steps:
  • 1. Power Supply Connection:
  • Connect Pin 1 (VCC) to the positive terminal of the power source (e.g., a battery or a regulated power supply).
  • Connect Pin 2 (GND) to the negative terminal of the power source or a common ground point.
  • 2. Motor Speed Control Connection:
  • Connect Pin 3 (PWM) to the PWM output pin of the microcontroller or motor driver.
  • Ensure the PWM signal frequency and duty cycle are within the motor's specified range.
  • Important Notes:
  • Make sure to use a suitable motor driver or a microcontroller with a built-in motor driver to control the motor's speed and direction.
  • Consult the motor's datasheet for specific voltage and current ratings to ensure safe and efficient operation.
  • Use proper wiring and insulation to prevent electrical noise, shorts, and damage to the motor and connected components.
  • By following this documentation, you can properly connect and operate the 300 RPM L Shape Single Shaft BO Motor in your IoT or robotics projects.

Code Examples

Component Documentation: 300 RPM L Shape Single Shaft BO Motor
Overview
The 300 RPM L Shape Single Shaft BO Motor is a compact, high-performance brushless DC motor designed for various IoT applications, including robotics, drones, and automation systems. This motor features an L-shaped design, single shaft, and a maximum speed of 300 RPM, making it suitable for applications requiring precise control and high torque.
Technical Specifications
Type: Brushless DC Motor
 Shape: L Shape
 Shaft: Single
 Maximum Speed: 300 RPM
 Voltage: 12V
 Current: 1A
 Torque: 1.5 kg-cm
 Power: 12W
Interface and Pinout
The motor has a 3-pin interface:
Pin 1: VCC (12V)
 Pin 2: GND
 Pin 3: Signal (PWM input)
Code Examples
### Example 1: Basic Motor Control using Arduino
In this example, we will demonstrate how to control the 300 RPM L Shape Single Shaft BO Motor using an Arduino board.
```
const int motorPin = 3;  // Pin 3 for signal input
void setup() {
  pinMode(motorPin, OUTPUT);
}
void loop() {
  // Set motor speed to 50% (150 RPM)
  analogWrite(motorPin, 128);
delay(1000);
// Set motor speed to 100% (300 RPM)
  analogWrite(motorPin, 255);
delay(1000);
}
```
In this example, we use the `analogWrite()` function to set the motor speed by generating a PWM signal on the signal pin. The motor speed can be controlled by adjusting the duty cycle of the PWM signal.
### Example 2: Motor Control using Raspberry Pi and Python
In this example, we will demonstrate how to control the 300 RPM L Shape Single Shaft BO Motor using a Raspberry Pi and Python.
```
import RPi.GPIO as GPIO
import time
GPIO.setmode(GPIO.BCM)
GPIO.setup(18, GPIO.OUT)  # Pin 18 for signal input
pwm = GPIO.PWM(18, 50)  # 50 Hz frequency
try:
    while True:
        # Set motor speed to 25% (75 RPM)
        pwm.start(25)
        time.sleep(1)
# Set motor speed to 75% (225 RPM)
        pwm.start(75)
        time.sleep(1)
except KeyboardInterrupt:
    pwm.stop()
    GPIO.cleanup()
```
In this example, we use the RPi.GPIO library to set up the GPIO pin as an output and create a PWM object. We then use the `start()` method to set the motor speed by adjusting the duty cycle of the PWM signal.
These examples demonstrate the versatility of the 300 RPM L Shape Single Shaft BO Motor and its compatibility with various microcontrollers and programming languages.