Description: 1. Microcontroller: Arduino Uno R3 is a microcontroller board based on the ATmega328P chip, which can be programmed using the Arduino Integrated Development Environment (IDE). 2. Input-Output Pins: It features 14 digital input-output pins (6 of them can be used as PWM outputs), 6 analog inputs, an ICSP header, and a USB connection for programming and communication. 3. USB Connection: Arduino Uno R3 comes with a USB connection, which not only enables programming but also acts as an interface to power the board via a computer or an external power supply. 4. Power Supply: The board operates on 7-12V DC (unregulated) or 7-12V DC (regulated) depending on the use of the voltage regulator module. An Automatic Reset function is available in case the input voltage falls below a certain level during operation. 5. Memory: Arduino Uno R3 comes with 32 KB Flash memory and 2 KB SRAM for storing program data, as well as 1 KB EEPROM for non-volatile user memory. 6. Programming Language: It can b
| Specification | Details |
|---|---|
| Microcontroller | ATmega328P |
| Clock Speed | 16 MHz (Crystal Oscillator) |
| Flash Memory | 32 KB of which 0.5 KB used for Bootloader |
| SRAM | 2 KB |
| EEPROM | 1 KB |
| Input/Output Pins | 20 (14 Digital 6 Analog) |
| Digital I/O | 14 |
| UART | 1 x Serial Port (TX/RX) |
| SPI | 1 x SPI Interface |
| I2C | 1 x I2C Interface (SDA/SCL) |
| Power Supply | 5V via USB or external power source |
| Operating Voltage | 7-12.6V |
| Current Rating | 40 mA |
| Dimensions | 68 x 53 mm |
1. Microcontroller: Arduino U...
1. Arduino UNO R3 Board: A mi...
1. Overview: Arduino VS1053 M...
1. Wio-WM1110 Dev Kit is an I...
1. The ATmega328 is a microco...
1. Microcontroller: Arduino N...
1. The Grove - NFC (SaT25DV64...